It is made from 300 X 300 denier rugged polyester with sun and UV reflecting silver poly urethane coating on top and two coats of highly water resistant polyurethane coating on the underside. Additionally, the material is laminated with soft polyester felt on the side that touches the vehicle. This helps protect the finish and keep the car looking new for years.
Coverking Silverguard Plus Car Cover Material
Reflective Coverking Silverguard Plus™ Custom Car Cover
Coverking car covers are made to order, crafted specifically for your vehicle using computer aided designs.
Coverking engineers design its fabrics, specify material composition and construction, meeting the most stringent auto test requirements.
Extra seams increase the chance of leakage and failure. Coverking car covers have the fewest possible seams, best looking and fitting.
Coverking car covers available in 9 materials, for indoor & outdoor use + many color choices.
Coverking outdoor car covers are sewn using double needle overlapped leak resistant seams, + backup stitch.
Silverguard Plus™ is a great all-weather fabric used by Coverking for custom car covers. Silverguard Plus™ is a special woven polyester fabric made with 300 denier yarn (twice as thick as similar fabrics) with a thick, silver reflective urethane coating on the outside. The polyester material is non-scratch and the urethane outer coating withstand extremes the sun for years. After this base material is produced, Coverking adheres a special soft lining to the inside. This lining adds softness, and also some bulk.MATERIAL
Coverking developed Silverguard Plus™ to address the middle-market with special consideration for sunny climates, and for people who need a soft inner liner. Silverguard Plus is also water resistant and extra soft to the vehicle's paint, so it is a great all-round cover. Keep in mind the extra inner lining makes Silverguard Plus almost twice as bulky as the regular Silverguard.CONSTRUCTION
Coverking uses wax coated thread in overlapped, double stitched seams. The wax coating expands in the pierced hole created during the stitching process, to help cover the hole. Competitors take the cheaper route by using an ultra-sonic welding of the material instead of sewing. This process is cheaper, because it melts the fabric layers together. It also doesn't use any thread. Than the area melted together becomes very hard and scratching the vehicle surface is common.WARRANTY
Coverking offers a 3 year repair or replace factory warranty on custom Silverguard Plus™ car covers.CARE and CLEANING
Silverguard Plus™ car covers can be easily cleaned by washing while on a the vehicle. Use common carwash detergent, and air dry.
2004-2022 CarCoverUSA, Inc. ©
645 Rossville Ave STE 3 #90004
Staten Island, NY 10309