Its the only non woven material with 5 layers of protection built in. Coverking starts with the top layer of polyester spun bond (other manufacturers use polypropylene which has little or no resistance to UV degradation). Coverking adds 2 layers of polyethylene micro porous film + meltblown layer (most competitors use one or the other). The 4th layer is spunbond and the 5th layer (a Coverking exclusive) is polyester felt to protect you vehicle's finish. Each layer is fortified with the finest UV retarding agents in the manufacturing process.
Mosom Car Cover Material
All-Weather Coverking Mosom Plus™ Custom Car Cover
All of the features and benefits of our Triguard™ and Coverguard 4™ covers, plus:
Coverking car covers are made to order, crafted specifically for your vehicle using computer aided designs.
Coverking engineers design its fabrics, specify material composition and construction, meeting the most stringent auto test requirements.
Extra seams increase the chance of leakage and failure. Coverking car covers have the fewest possible seams, best looking and fitting.
Coverking car covers available in 9 materials, for indoor & outdoor use + many color choices.
Coverking outdoor car covers are sewn using double needle overlapped leak resistant seams, + backup stitch.
Mosom Plus™ is a revolutionary premium all-weather fabric used by Coverking for the custom car covers. This material is made in Taiwan. The technical name of this material is Spunbond Polyester laminated to 1 layers of Meltblown Polypropylene laminated to a special micro porous film laminated to Spunbond Polyester. The specification Coverking uses for Mosom Plus™ is far superior to other polypropylene based materials.MATERIAL
Coverking developed Mosom Plus™ in-house. They purchased the film and separate layers, then have a laminating company fuse them together. Coverking uses spunbond polyester for both outer layers. Most competitors use spunbond polypropylene. Polyropylene is inherently less UV resistant and is more likely to degrade with exposure to UV rays emitted from the sun. Coverking also adds additional UV retardant, which ensures even longer stability in the sun. Coverking also insists on the highest quality film - it is both UV stable and over engineered to stand up to the rigors of car cover use. Finally, Coverking insists on the heaviest inner and outer layer materials. Most other companies use materials about 15% lighter than Coverking.CONSTRUCTION
Coverking uses wax coated thread in overlapped, double stitched seams. The wax coating expands in the pierced hole created during the stitching process, to help cover the hole. Competitors take the cheaper route by using an ultra-sonic welding of the material instead of sewing. This process is far cheaper, because it melts the fabric layers together. It also doesn't use any thread. Unfortunately, the area melted together becomes very hard and examples of scratching the vehicle surface are not uncommon.WARRANTY
Coverking offers a 3 year repair or replace factory warranty on custom Mosom Plus™ car covers.CARE and CLEANING
Mosom Plus™ car covers can be easily cleaned by washing while on a vehicle. Use common carwash detergent, and air dry.
2004-2022 CarCoverUSA, Inc. ©
645 Rossville Ave STE 3 #90004
Staten Island, NY 10309