CarCoverUSA, Inc.
Shopping Cart
Order Status: Check My Order

Silverguard Plus Car Cover

Coverking Silverguard Plus Car Cover
Silverguard plus is the HUMMER of car covers, a work horse that will protect your vehicle for years against most of natural and manmade hazards. It is made from 300 X 300 denier rugged polyester with sun and UV reflecting silver poly urethane coating on top and two coats of highly water resistant polyurethane coating on the underside. Additionally, the material is laminated with soft polyester felt on the side that touches the vehicle. This helps protect the finish and keep the car looking new for years.
Silverguard+ is a 300 Denier polyester material with a reflective, water resistant coating on the outer layer and a soft, non-abrasive layer on the inside. It is a great choice for all-around car cover use, suggested for most conditions except extreme rain, snow or ice. 300 denier is a strong, heavy weave which will not rip or tear easily. The silver coating on Silverguard+ does an excellent job of reflecting sunlight, while keeping rain and animal droppings from damaging the vehicle finish. The special soft inner layer pampers the most delicate paint finish.

Silverguard Plus is a great all-weather fabric used by Coverking for our custom car covers. Silverguard Plus is a special woven polyester fabric made with 300 denier yarn (twice as thick as similar fabrics) with a thick, silver reflective urethane coating on the outside. The polyester material is non-scratch and the urethane outer coating should withstand extreme sun for years. After this base material is produced, we take the material to another facility to adhere a special soft lining to the inside. This lining adds softness, and also some bulk.

Coverking developed Silverguard Plus to address the middle-market with special consideration for sunny climates, and for people who need a soft inner liner. Silverguard Plus is also water resistant and extra soft to the vehicle's paint, so it is a great all-round cover. Keep in mind the extra inner lining makes Silverguard Plus almost twice as bulky as the regular Silverguard.

Coverking uses wax coated thread in overlapped, double stitched seams. The wax coating expands in the pierced hole created during the stitching process, to help cover the hole. Once again, some competitors take the cheaper route by using an ultra-sonic welding of the material instead of sewing. This process is far cheaper, because it melts the fabric layers together. It also doesn't use any thread. Unfortunately, the area melted together becomes very hard and examples of scratching the vehicle surface are not uncommon.

Coverking offers a 1 year repair or replace warranty on custom Silverguard Plus covers.

Silverguard Plus can be easily cleaned by washing while on a vehicle. Use common carwash detergent, and air dry.

CarCoverUSA Brands

© 2004-2017 CarCoverUSA.