Coverking custom tailored dash covers offer the best protection and fit with exclusive zigzag stitching. Made with matching thread and binding. Most Coverking Dashboard Covers are made in the USA with U.S. made materials at the California factory. Coverking custom dashboard covers are popular in the sunbelt states to combat the damaging effects of the sun, heat, reduce sun glare and windshield reflection while enhancing the interior. Coverking's custom dashboard covers soften the plastic look of a vehicle's interior and provide long term protection to the vehicles dashboard. Coverking custom Rear Deck Covers, cover the rear deck area of vehicles behind the rear seats and are available in the same materials and fabrics as a custom dashboard covers. Coverking best looking and fitting dash cover is the Molded Dash Cover. This is a thermo-formed carpet dash cover, molded to the exact shape of the dashboard, resulting in a perfect fitting cover with no stitching - this is the ultimate custom dash cover. Formed on an exact replica of your dashboard, no seams, holds its shape for life, will not warp or curl.
Carpet Dash Covers | Velour Dash Covers | Molded Dash Covers | Camo Dash Covers | Designer Print Dash Covers | Rear Deck Covers
Coverking Workmanship: Coverking uses state of the art manufacturing technology to produce dashboard covers. Computer aided design and manufacturing technology results in the production of perfect fitting dashcovers every time!
How to install a Coverking Dashboard Cover
1. Unpack and check fit the Coverking dash cover, keep in mind the dash cover will not fit perfectly straight out of the box. You will just be checking for the proper cutouts for things like the defroster, airbag, headlight sensors etc.
2. Lay the Coverking dash cover out in the sun, this will help form to its intended shape from being folded and rolled into the shipping box. The longer you allow the product to sit out and warm in the sun the easier the install will be.
3. Included with the Coverking dash cover are male ends of the Velcro, turn the cover over and stick them on to the stitched in tabs. DO NOT REMOVE THE BACKING AT THIS TIME.
4. Position the Coverking dash cover in place, making sure to tuck the it in between the windshield and dashboard.
5. Using the includewd alcohol pad clean the areas underneath the Velcro pads.
6. Peel off the backings one at a time and press down firmly and hold for a few seconds to keep them in place.
7. After your Coverking dash cover is installed there is no other follow up maintenance to be done, if you need to clean your dash cover Coverking recommends a spot treatment with a mild detergent and warm water.
