Scooter Covers by Covercraft Ready Fit Scooter

Covercraft Scooter Features & Benefits
Protection from the elements, sized to fit almost any scooter. Semi-custom covers in six (6) sizes fit scooters with or without windscreens, saddlebags or rear storage boxes. Silver urethane coated deck panel reflects heat and stops UV rays from damaging paint, plastic and rubber. Side panels are light-weight PVC coated nylon to assure easy handling and storage. Features strong, overlapped, double-needle sewn seams; neoprene elastic in the front and rear hems to help hold the cover in place; vent in deck panel to allow condensation and fumes to escape from under the cover; and reinforced security grommets on each side panel (for use with optional lock & cable kit). Scooter covers carry a lifetime limited warranty to the original purchaser.  Covercraft will repair or replace any cover that becomes unserviceable during normal use (subject to factory inspection). UV reflective deck with vent, tie down security grommets at the bottom hem.
Covercraft Scooter Covers         Scooter Cover by Covercraft
Part # Scooter Type Size Price Qty
XS801SU Small Scooters
Smallest scooters
up to 67in overall length 48.95
XS802SU Small Scooters
With windshield & rear box
up to 70in overall length 50.95
XS803SU Medium Scooters from 67in to 76in 51.95
XS804SU Medium Scooters
With windshield, sissy bar or rear box and saddle bags
from 67in to 79in 59.95
XS805SU Large Scooters
Tall w/windshield, box bags
80in overall & above 65.95
XS806SU Large Scooters
With or without windshield
80in overall & above 58.95

Covercraft Scooter Cleaning Instructions


Motorcycle, Scooter & ATV Cover Cleaning Instructions
Cover fabric performance can be severely affected by dirt that builds up on and within the material creating a “wicking” effect that actually helps pull water through the fabric, nullifying any water resistant properties the fabric may have had. Cleaning your cover will help to keep your motorcycle, scooter or ATV clean and also increase the service life of the cover.

For Urethane Coated Cycle, Scooter and ATV Covers ONLY:

Clean the cover while installed or lay on a flat surface.
  1. Mix one ounce Simple Green All-Purpose cleaner per quart of warm water
  2. Spray or sponge onto cover
  3. Rinse with plain water (until no suds) and allow to air dry

Optional Power Sports Cable & Lock Kit: 30" Vinyl coated steel cable & Lock kit: $9.99
Description Part # Price
Scooter Cover Cable & Lock Kit ZCML $9.99

Scooter Cover Covercraft Ready Fit Scooter Covers

Website: www.CarCoverUSA.com  |  Email: sales@carcoverusa.com